Last Modified
|
Threads -
|
Fri, 12 Jan 2024 15:50:04 -0800
|
Wayne Dalton idrive Troubleshooting Tip #1 - Check the Fuse
|
Fri, 12 Jan 2024 15:49:18 -0800
|
Idrive arm Locked before door is closed
|
Fri, 05 Jan 2024 16:30:10 -0800
|
Maximum Number of Remotes for Wayne Dalton idrive for Torsion Spring
|
Fri, 24 Nov 2023 22:48:55 -0800
|
Wayne Dalton idrive for Torsion Springs - Solution #1: Install Custom Upper Limit to Successfully Profile
|
Fri, 24 Nov 2023 22:42:56 -0800
|
idrive motor won't flip up
|
Mon, 23 Oct 2023 12:53:53 -0700
|
R1 Resistor on Torsion iDrive 3652-372
|
Thu, 25 Mar 2021 02:50:52 -0700
|
idrive Spring Install Cause idrive to Operate in Reverse
|
Fri, 26 Jun 2020 09:57:46 -0700
|
Two idrives acts differently
|
Sat, 02 Nov 2019 14:17:23 -0700
|
iDrive terminal block?
|
Sat, 04 May 2019 21:17:23 -0700
|
Wayne Dalton Classic Drive Model 3018 with a Liftmaster hardwired keypad.
|
Sat, 09 Mar 2019 12:03:39 -0800
|
idrive for TorqueMaster is Temperature Sensitive
|
Fri, 07 Dec 2018 23:05:28 -0800
|
iDrive for Torquemaster problem- will lower but not raise
|
Sun, 19 Nov 2017 22:43:39 -0800
|
How to release tension on Torque Master when bolts came off?
|
Sun, 19 Nov 2017 22:43:39 -0800
|
Fixing the Torsion Springs on Wayne Dalton Torque Master
|
Thu, 16 Nov 2017 14:38:00 -0800
|
Torque Master idrive struggling to raise the door
|
Fri, 14 Jul 2017 22:11:55 -0700
|
Wayne Dalton iDrive keep blowing fuses
|
Mon, 03 Jul 2017 16:36:20 -0700
|
I-Drive for Torquemast - motor won't lift
|
Fri, 30 Jun 2017 14:59:23 -0700
|
Torsion Drive Unit Beeps 5 Times
|
Wed, 17 Aug 2016 21:17:53 -0700
|
idrive TorqueMaster only goes up after thunder storm
|
Thu, 28 Jul 2016 21:57:54 -0700
|
Motor operates backwards
|
Mon, 23 May 2016 21:26:29 -0700
|
idrive torquemaster fuse
|
Fri, 15 Apr 2016 09:54:09 -0700
|
Looking for a idrive replacement board
|
Tue, 12 Apr 2016 22:55:18 -0700
|
idrive starts operating on its own
|
Wed, 17 Feb 2016 16:31:34 -0800
|
Mating the Liftmaster 3800 to Wayne Dalton TorqueMaster
|
Wed, 17 Feb 2016 16:30:11 -0800
|
iDrive versus Liftmaster 3800
|
Tue, 05 Jan 2016 12:07:03 -0800
|
Wayne Dalton 3663-372 Does Not Engage Motor
|
Mon, 16 Nov 2015 20:10:46 -0800
|
ProDrive light will not go out
|
Tue, 20 Oct 2015 13:59:12 -0700
|
garage door slams down with idrive for Torsion Spring
|
Wed, 14 Oct 2015 14:07:47 -0700
|
Wayne Dalton idrive - Remote Only Works a Few Inches Away From Opener
|
Mon, 05 Oct 2015 01:56:10 -0700
|
Wayne Dalton Quantum 3414 Stops Prematurely
|
Tue, 01 Sep 2015 13:07:19 -0700
|
Garage Door Cable Unwinds and Tangles Up
|
Fri, 10 Jul 2015 11:20:04 -0700
|
Wayne Dalton idrive for Torsion Springs - Motor Specification
|
Sun, 19 Apr 2015 22:58:44 -0700
|
Wayne Dalton 9600 with Torque Master Plus Problem
|
Thu, 05 Mar 2015 13:31:34 -0800
|
seasonal temperature affects idrive for torque master
|
Tue, 03 Mar 2015 11:17:59 -0800
|
Wireless Light No Longer in Sync with idrive
|
Thu, 26 Feb 2015 13:20:46 -0800
|
Wayne Dalton Garage Door opens in two foot increments
|
Sun, 22 Feb 2015 13:59:06 -0800
|
Remote Problems with idrive for Torsion Springs
|
Thu, 19 Feb 2015 20:17:08 -0800
|
idrive opens garage door 6 inches at a time
|
Tue, 27 Jan 2015 15:06:43 -0800
|
Wayne Dalton idrive Torquemaster model 3661 Closes Half-Way
|
Tue, 13 Jan 2015 10:42:24 -0800
|
no tension in the cables
|
Tue, 30 Sep 2014 10:55:27 -0700
|
Idrive for Torque Master - Lightning Fried Circuit Board
|
Mon, 05 May 2014 10:31:44 -0700
|
Idrive for Torque Master - Two Long Beeps Then Two Quick Chirps
|
Tue, 08 Oct 2013 09:17:56 -0700
|
idrive does not close while profiling
|
Sat, 05 Oct 2013 17:06:45 -0700
|
Wayne Dalton Quantum 3214 Opens at 2 Feet Increments
|
Tue, 01 Oct 2013 11:00:15 -0700
|
IDrive wont close-intermittant
|
Mon, 30 Sep 2013 06:42:16 -0700
|
Wayne Dalton idrive Troubleshooting Tip #2 - Check the Motor Guide Position
|
Thu, 05 Sep 2013 19:06:39 -0700
|
I-drive motor not engaging
|
Sun, 25 Aug 2013 22:40:19 -0700
|
Did Lightning Burn My idrive?
|
Thu, 15 Aug 2013 10:56:27 -0700
|
idrive light will not turn off
|
Wed, 03 Jul 2013 11:12:35 -0700
|
Replaced blown fuse
|
|