idrive does not close while profiling

Add Comment | Related Links | TrackBack
Related Content

idrive does not close while profiling

idrive will not close. I tried to run the profile routine but it opens then tries to close then stops. I checked the wheels don't see anything that seems to be obstructing any of the rollers. There are no safety sensors installed. Looks like the motor is suppose to pivot down when it is closed but it is not doing so. Any ideas?

Kevin
Tue, 08 Oct 2013 19:14:13 +0400

See if the garage door is balanced... Does not move is the 1/4, 1/2, and 3/4 open position. If it is not balanced, idrive may not have enough force to push it down.

Chieh Cheng
Tue, 08 Oct 2013 20:17:56 +0400

Add Comment | Related Links | TrackBack
Related Content

Did your message disappear? Read the Forums FAQ.

Add Comment

Spam Control | * indicates required field

TrackBack

TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.

Send Ping | TrackBack URL | Spam Control

No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.

Messages, files, and images copyright by respective owners.

Fun for Photographers

Get Our

Memecoins!

Fun for Photographers