Craftsman C3 19.2V Power Tools Battery Conversion Guide
Looking for a Craftsman C3 19.2V battery adapter to use other brands' battery packs on your Craftsman C3 19.2V power tools? You came to the right place. This page provides recommendation of battery adapters and various methods for you to do just that.
Black+Decker 20V MAX Battery Pack
Craftsman V20 Battery Pack
We have not found a direct Craftsman V20 20V battery pack to Craftsman C3 19.2V power tool adapter. But luckily for you, we have found two adapters, when combined together makes the desired adapter:
DeWALT 20-Volt MAX Battery Pack
Milwaukee M18 RedLithium Battery Pack
Porter Cable 20V MAX Battery Pack
Ryobi ONE+ 18V Battery Pack
As of this writing, there is no direct battery converter for Ryobi ONE+ 18V battery Pack to Craftsman C3 19.2V power tool. But if you have some electrical skills, you can build a combination that would do the trick. See the combinations below.
The DIY adapter above is a do-it-yourself adapter, so you will need to provide the circuitry to make it work. Luckily, you don't have to provide the over-discharge protection circuitry, because it has been reported (here and here) that the Ryobi ONE+ batteries do have built-in over discharge protection. Therefore, it should be safe to use Ryobi ONE+ batteries with adapter(s) on Craftsman C3 19.2V power tools. But you might consider disassembly your Ryobi ONE+ battery to ensure that there is an over discharge protection circuit.
118 Users Online
Copyright © 2004 - 2022. All Rights Reserved.