Replacing Campbell Hausfeld CC 2300 Portable Inflator Battery
Thanks for posting this. I need a new inflator and I own this one and the battery is loosing charge life out and I wanted to replace it if possible; as I too had this for years, it's well made and I want to keep it.
Also do the battery wires need soldered to the battery ?
No. The wires have battery connectors on them. But I remember the battery I got had slightly bigger tabs. So I cut off the connectors on the inflator wires and cramped on two new connectors onto the wires.
Thanks for the great detailed instructional. I have one of these left abandoned new in some rental property from a decade ago. The AGM finally bit the dust, and per your lead, I've bought a replacement at Amazon for $23 shipped.
I tried to find a battery in 2013, but they cost as much as the charger. Now I found one for $17. Hanging onto my old junk pays off again!
Thanks for this post. It was a life saver. I have a 15-20 year old Campbell Haufield cc2300. I bought a newer version of this unit for another house and it never worked well so I bought a non-battery powered one instead. Then this old one started losing battery power and I was sad to see this unit go---until I read your post. I bought a replacement battery online for $14 plus $8 shipping. It took literally 5 minutes to replace and it works great. Maybe get another 15-20 years on this unit. Thanks again for giving us an alternative to replacement.
THANK YOU FOR THIS!! I was about to replace the unit entirely not knowing if a replacement battery existed or not. Found a 12V 8.0Ah for less than $20. All is well again!
Did your message disappear? Read the Forums FAQ.
TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.
Title: Campbell Hausfeld CC 2300 Portable Inflator Getting Tired?
Spam Control | * indicates required field
Messages, files, and images copyright by respective owners.
170 Users Online
Copyright © 2004 - 2024. All Rights Reserved.