Bauer 20V Power Tools Battery Interfaceanyone have any luck making an adapter to use bauer batteries on hercules tools? nick Re: the pin labeled TH. I can't verify this at the moment, but I would expect that connects to a thermistor to monitor battery pack temperature. I have an adapter from Amazon to allow me to use a Milwaukee M18 battery in a Bauer tool. My adapter has a 10k ohm resistor from B- (battery negative) to the TH terminal, ans also a 15.0k ohm resistor from B- to the adjacent terminal labeled IO in the image on this page. Tom Bruhns TH is the thermistor pin (thermistor is a diode that changes resistance with temperature) used to sense the battery's temperature, its room temperature resistance is around 10k ohms. Anton
Did your message disappear? Read the Forums FAQ. Add Comment
TrackBackTrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.
No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here. Messages, files, and images copyright by respective owners. |
Articles
|
Wiki
344 Users Online
![]() |
Copyright © 2004 - 2025. All Rights Reserved. |