|
I drive torquemaster no power,no beepsI have a 12 year old I Drive Torquemaster that was working fine and just stopped opening and I get no beeps when i try to open, Ive tried using all remotes and have power to the opener and the light does not come on either i have put the remote right next to the opener and it will still not do anything, any ideas would be helpful. Thanks, Bill Bill Howe Do you have any indication that it's powered up at all? Based on your description, it sounds like it is completely dead. Maybe the power cable has loosen from the idrive. Perhaps the fuse is burnt out? Take a look at this thread: idrive torquemaster fuse. Chieh Cheng I did read that thread and bought 2 new fuses off Ebay for 10.00. I figured if that wasnt it i was only out 10. It took about ten minutes and a steady hand with needle nose plies to change the fuses and Wala it beeped twice when I powered it up. It works fine and I did not have to reprogram the remotes however the light does not work. i changed the bulb checked the wiring inside the light and cleaned the sensor eye any ideas on what else to check would be helpful. Thanks alot, Bill Bill Howe
Did your message disappear? Read the Forums FAQ. Add Comment
TrackBackTrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.
No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here. Messages, files, and images copyright by respective owners. |
Articles
|
Wiki
253 Users Online
Get Our
|
|
Copyright © 2004 - 2024. All Rights Reserved. |
|
Related Links
|
TrackBack
