Garage Door Cable Unwinds and Tangles Up

Add Comment | Related Links | TrackBack
Related Content

Garage Door Cable Unwinds and Tangles Up

I've had my WD idrive for about 10 years and based on the pictures above it is the TorqueMaster with the drop down locking arm. My problem is that the door will automatically raise but when I try to close it automatically the mechanism begins to coil but the door does not close and the cable moves off track and tangles up. I've spent many hours trying to reposition the cable. Now I open the door automatically and close it manually. Is this a fuse issue as well? Somebody told me there is a spring/coil that is housed in a cylinder that runs from one side of the door to the other and it might be broken. Any suggestions appreciated.

Eddie T.
Wed, 02 Oct 2013 22:10:28 +0400

No. Your problem has nothing to do with the fuse. If it is the fuse, the idrive will not respond at all.

It's not clear if your problem has anything to do with the garage door opener (idrive). It may have something to do with your cable, drum, or track mechanism. Do you have some pictures?

Chieh Cheng
Wed, 02 Oct 2013 22:25:24 +0400

Most likely this is a problem with the garage door itself. Try checking the door balance. The door should not be too heavy and slam down nor should it fly open. Does the door go up and down smoothly? Make sure the door isn't binding at any point in travel either. I would also check to make sure the horizontal tracks are level and not sloping towards the garage floor as well.

Alex
Mon, 14 Oct 2013 05:07:52 +0400

Add Comment | Related Links | TrackBack
Related Content

Did your message disappear? Read the Forums FAQ.

Add Comment

Spam Control | * indicates required field

TrackBack

TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.

Send Ping | TrackBack URL | Spam Control

No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.

Messages, files, and images copyright by respective owners.

Fun for Photographers

Get Our

Memecoins!

Fun for Photographers