Forums: Automotive: alOBD Scanner

Add Comment | Related Links | TrackBack
Related Content

Frequently Asked Questions (FAQ)

Do you have plans to include the 2007 Ford cars and trucks?

Johnny
Fri, 13 Aug 2010 01:01:54 +0000

I have released FORD CAN Mode $06 parameters. It supports vehicles 2006-2010. If you're still interested, check it out on Android Market. I tested some of the parameters on 2010 Ford F150. Be sure to update alOBD Scanner for everything to work properly.

Alexandre Beloussov
Fri, 13 Aug 2010 01:02:47 +0000

Hello,
Necesito saber si funciona para un Mercedes Benz Clase A 160 a�o 2000 y como se conectaria al auto?
Estoy en argentina.
Thanks

Serch

Sergio
Fri, 13 Aug 2010 01:06:05 +0000

If you need to connect to your car, you first need to ensure that your
car has OBDII or EOBD plug (DLC) somewhere in the driver's side foot
well. Then, you'd need an ELM-based Bluetooth adapter that you could
purchase on eBay.

Alexandre Beloussov
Fri, 13 Aug 2010 01:07:04 +0000

would you happen to know where would I buy the obd2 bluetooth module for my 04 subaru wrx?

Josh
Fri, 13 Aug 2010 01:09:31 +0000

PLX devices at http://www.plxdevices.com/
came out with a Bluetooth adapter that will ship in September.

In addition, eBay has devices based on ELM Chip. Just type "Bluetooth ELM" in search box.

Alexandre Beloussov
Fri, 13 Aug 2010 01:10:55 +0000

If this works how do you plug into the DLC or ECM??

Nick
Fri, 13 Aug 2010 01:12:26 +0000

You have to have Bluetooth adapter. It has to be based on an ELM chip.
Usually it plugs in to the vehicle's Data Link Connector (DLC), which,
in turn, connects to the main engine control computer (ECU, PCM or
DME). The generic OBDII commands (including Mode $06) are serviced by
the main engine control computer.

So, in short, a Bluetooth ELM adapter connects to DLC, which
communicates with the main engine control computer (ECU).

Alexandre Beloussov
Fri, 13 Aug 2010 01:13:21 +0000

Do you/ are you planning any VAG functions for Audi/ VW?

Also wanted to know if the Ford addon adds functionality for the Powerstroke diesels (specifically 1999-2003)
Thanks!
Ben

Ben
Sat, 04 Sep 2010 21:38:01 +0000

At this time there are no plans for VAG functions for Audi/VW.

As for Ford Diesel - the add on (J1850 one) does provide mode $06 PIDs
for diesels and gasoline engines. Ford's website documents indicate
that there are no differences in generic Mode $06 PIDs for diesel
engines vs. those of gasoline. You could get an insight on how OBD
works specifically for diesels at the below link.

http://www.motorcraftservice.com/vdirs/retail/default.asp?pa . . .

Alexandre Beloussov
Sat, 04 Sep 2010 21:39:00 +0000

Hi. Do you plan to make Japanese OBD protocol in your program?

Alex
Tue, 15 Feb 2011 08:10:12 +0000

Alex,
I, currently, do not have plans to make specific Japanese OBD protocol largely because I do not have access to its description. As far as I know, most of the PIDs for the American OBDII should work. I may be mistaken, though.

Alexandre Beloussov
Tue, 15 Feb 2011 16:20:12 +0000

Hi is there a obd2 android scanner for a 01 Subaru wrx ej20 turbo 2 litre, I can't seem to find 1 that will work
Thank William

william
Sun, 09 Oct 2011 09:34:54 +0000

Add Comment | Related Links | TrackBack
Related Content

Add Comment

Spam Control | * indicates required field

TrackBack

TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.

Send Ping | TrackBack URL | Spam Control

No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.

Messages, files, and images copyright by respective owners.

Copyright © 2004 - 2024. All Rights Reserved.