|
Trouble closing door - torque master issue13 year old system (torque master counterbalance system, 16 or 18ft door) is having an issue closing. Door nears the bottom (~ 2 ft) and is shaky, many times stopping and re-opening. Started about a year ago so I increased downward force at drive system. I know this isn't the correct solution, but has gotten me by for a while. Has gotten worse now. With drive disengaged, it's relatively easy to open the door by hand, but closing it is difficult. Seems to be caused by the left side of torque tube. Is this a broken spring issue? Could something be binding inside? It's definitely not the motor/drive. Cables are tight, both sides set to 16. Haven't had time to take apart and investigate. Any thoughts? Robert
Did your message disappear? Read the Forums FAQ. Add Comment
TrackBackTrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.
No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here. Messages, files, and images copyright by respective owners. |
Articles
|
Wiki
216 Users Online
Get Our
|
|
Copyright © 2004 - 2024. All Rights Reserved. |
|
Related Links
|
TrackBack
