May 4, 2014 · Lately, the door opens fine but when it closes, it comes down to about 5' from the floor then it stops and reverse to full open. Follow the ...

Apr 16, 2015 · With the door down, if you push the button to raise it, the motor runs and makes a nasty grinding sound. The door does not move. If you pull the ...

Jan 4, 2009 · I used a longer piece of 3/4" PVC tube and hand-hammered it down one end of the torque tube until all of the stuck pieces (broken spring, nylon ...

1. Ensure the door is running smoothly before installation. 2. Throw away the plastic cable retainers as they can cause binding. 3. Leave 3/ ...

Jun 3, 2006 · My advise to all is if you are having problems - first manually cycle your door to make sure it is in balance and has no friction spots. The ...

Jan 11, 2024 · I have a idrive for Torsion springs ( not the pro). The locking arm is getting stuck between door panels & wall before the door can fully close.

Jan 4, 2014 · When I put the red handle in the manual position the door freely moves from full open to full close and from full close to full open. The door ...

Dec 6, 2005 · After losing one of the two torsion-springs. The door is no longer counter-balanced and is very heavy. Of course the idrive garage opener can't ...

WARNING! During programming the garage door may operate. Keep people and objects clear of the moving door to prevent door damage or possible personal injury ...

Sep 12, 2009 · In my case the black collar was overdriven to the right (door open direction) until it hit the right motor detent pin end bearing. This ...