Does Elegoo Ender 3 Nozzle Have a White PTFE Tube Liner?
I got a Elegoo Ender 3 3D printer recently. It printed PLA perfectly pretty much straight out of the box. I had to put it together, of course.
But I've been looking into printing PETG recently and the nozzle temperature has to be a lot hotter. While reading "Guide: How to Print with PETG", I noticed that it mentioned a white PTFE tube liner that comes in many nozzles.
Supposedly, this liner will melt at higher temperature. And we are talking about PETG temperature. I don't know what exactly does this liner do. Apparently there are replacement nozzles that does away with the liner. But the main question is whether the Elegoo Ender 3 comes with one of these plastic liner nozzle?
Elegoo responded to your message on Twitter:
"Hi Gab, PETG material print temperature is 230-250, bottom plate temperature is 80-120, our Ender 3 can print directly, no need to replace the nozzle. Hope this would help."
Thanks to @LetsPrint_3D for the following tweet:
"@Cynosure_X_Gab I was just notified of your tweet to @Elegoo_Official about PETG printing temps and PTFE lined hotends. Despite what they said, if the heatbreak does in fact have PTFE liner, do NOT exceed 245°C without an all metal hotend (most PETG does print fine around 240C)"
Did your message disappear? Read the Forums FAQ.
Spam Control | * indicates required field
TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.
No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.
Messages, files, and images copyright by respective owners.
69 Users Online
Copyright © 2004 - 2020. All Rights Reserved.