Simply cut away the little tab that prevent another 2.5" hard drive from being inserted into the bracket. The following is a photo of the plastic bracket. In ...
To remove the hard drive, you'll have to unscrew the circuit board first. There are three small screws fastening the circuit board to the metal bracket. Two of ...
Aug 29, 2010 · Just acquired an Acer Travelmate 331T and can't see where to turn it on. I do see the little Green led light up on the right of the screen. Also ...
Unscrew a small screw on the metal enclosure. Next, undo the tapes for the LED. Then you can slide the metal panel off to reveal the internal hard drive.
May 10, 2007 · To disassemble the USB enclosure, insert a small flat head screw driver between the case and its rubber sides (see photo below). Pry slowly ...
Toshiba Canvio Desktop External Hard Drive Disassembly - GearHack
www.gearhack.com › myink › ViewPage
The hard drive is easy to remove from the plastic case. Two screws at the bottom of the heat sink secures the drive and the SATA/USB adapter. Four additional ...
Aug 18, 2013 · I have a problem: if I connect the drive to the PC and then I turn on the PC, the drive partition cannot be see by the OS. If I unplug / replug ...
Feb 9, 2005 · It didn't take me long to slip the metal clip off the angled screwdriver and remove the metal ball. Putting the ball and clip on the Dakine ...
Jul 2, 2006 · I started by unscrewing and taking off the left panel on the bottom of the notebook, but it turned out to be the CPU, heat-sink, and fan bay.
After unscrewing the enclosure pull the enclosure apart (see photo below). You'll find that the hard drive is actually mounted upside-down in the external ...