Revision: 20240911_175342 | All Revisions
Installing the Windows Device Driver for the Heltec V3 LoRa IoT Development Board
Are you having trouble connecting to the Heltec V3 board on Windows? If so, this article will help you step-by-step.
There are two possible reasons why your Heltec V3 board is not working with your Windows computer:
- Your USB Type-C cable provides charging capability only. Please see our "How to Determine If You have the Proper USB Type-C Data Cable for the Heltec V3 LoRa IoT Development Board?" article to make sure you have the proper USB Type-C data cable.
- Your Windows computer is missing the device driver needed to recognize the Heltec V3 board. This article will help you determine whether you have the device driver and help you install it if necessary.
Comments & Discussion >>
Determine Whether the Device Driver is Installed
Before installing the device driver, it's best to determine whether the device driver is already installed. Follow these steps to perform a quick check:
- Ensure the USB cable and the Heltec V3 board is not plugged into the Windows computer.
- Start "Device Manager" on your Windows computer. You can start it by searching for "Device Manager" in the Windows Start menu.
- Ensure that there is no "CP201x" related device(s) under the "Other devices" and "Ports (COM & LPT)" category.
- Plug the USB Type-C cable into the USB port on your Windows computer.
- Plug the USB Type-C cable into Heltec V3 board.
- Do you hear your computer make the typical sound when you plug in a USB device? If not, you probably don't have the right cable; please go through our "How to Determine If You have the Proper USB Type-C Data Cable for the Heltec V3 LoRa IoT Development Board?" article. If so, please continue with the next step.
- Look under "Other devices" category in "Device Manager" and see if "CP2102 USB to UART Bridge Controller" shows up (see screen shot below). If so, your Windows computer is missing the device driver; please see the next "Installing the Device Driver" section to install it. If you don't see that entry in "Other devices" category, follow the next step below.
- Look under "Ports (COM & LPT)" category in "Device Manager" and see if "Silicon Labs CP210x USB to UART Bridge (COM5)" shows up (see screen shot below). The "COM5" could be any COM port available on your computer. If so, you already have the proper device driver; you may skip this article.
Comments & Discussion >>
Installing the Device Driver
Comments & Discussion >>
Related Links
|
Articles
|
Wiki
Forums
|
Latest
|
Library
|
Links
|
News
Search
|
Store
|
Help
52 Users Online
Fun for Photographers
|
- Amazon User Reviews
- Amazon User Reviews