The hard drive is easy to remove from the plastic case. Two screws at the bottom of the heat sink secures the drive and the SATA/USB adapter. Four additional ...

Aug 18, 2013 · I have a problem: if I connect the drive to the PC and then I turn on the PC, the drive partition cannot be see by the OS. If I unplug / replug ...

To remove the hard drive, you'll have to unscrew the circuit board first. There are three small screws fastening the circuit board to the metal bracket. Two of ...

Unscrew a small screw on the metal enclosure. Next, undo the tapes for the LED. Then you can slide the metal panel off to reveal the internal hard drive. The ...

It's fish-shaped enclosure wasn't too eye-pleasing at first, but after taking it apart, the external enclosure is actually well made and simple to swap drives.

Use a small flat-head screwdriver to pry between the seams on the drive. I decide to start on the vents on the back of the drive (see photo below). Because they ...

The Western Digital Elements External Hard Drive has a plain black enclosure. It's as if WD made it for people who want to hide their hard drive or keep people ...

In this article, we provide a short review and disassembly instructions for this second generation external enclosure. We use the 3TB (STBV3000100) version as ...

Use a small flat-head screwdriver to pry between the seams on the bottom of the drive. Because they are locking tabs, you will break off several, if not all, of ...

The question is whether it's possible to replace the drive inside the case with another SATA drive. We might want to do this when the 2TB drive eventually fails ...