Dec 26, 2006 · To disassemble the Sony VAIO SuperSlim PCG-505TS notebook, turn it upside-down and remove the 9 screws identified by the arrows (see photo below) ...
To remove the hard drive, you'll have to unscrew the circuit board first. There are three small screws fastening the circuit board to the metal bracket. Two of ...
Toshiba Canvio Desktop External Hard Drive Disassembly - GearHack
www.gearhack.com › myink › ViewPage
The hard drive is easy to remove from the plastic case. Two screws at the bottom of the heat sink secures the drive and the SATA/USB adapter. Four additional ...
Installing the Sound Card Driver on Ubuntu 5.1 for Sony VAIO PCG-505TS SuperSlim Notebook. I finally installed Ubuntu 5.1 (The Breezy Badger) Linux ...
Simply cut away the little tab that prevent another 2.5" hard drive from being inserted into the bracket. The following is a photo of the plastic bracket. In ...
Use a small flat-head screwdriver to pry between the seams on the drive. I decide to start on the vents on the back of the drive (see photo below). Because they ...
Unscrew a small screw on the metal enclosure. Next, undo the tapes for the LED. Then you can slide the metal panel off to reveal the internal hard drive.
After unscrewing the enclosure pull the enclosure apart (see photo below). You'll find that the hard drive is actually mounted upside-down in the external ...
Use a small flat-head screwdriver to pry between the seams. Because they are locking tabs, you will break off several, if not all, of the tabs to open the case.
You can find a seam on the bottom of the drive, all around the edge. If you slip a miniature flat-head screwdriver, you can easily pry the enclosure apart (see ...