Netgear Arlo Camera Shows Low Battery Even with Fresh Battery Installed
Recently, I had let my back yard Arlo camera run low on batteries for weeks. I kept forgetting to change their batteries. Finally I did that a few days ago. But after putting in two sets of fresh batteries, the Arlo app still shows low batteries on the Arlo camera.
I tried removing the camera from the Arlo app, then tried re-sync the base station to the Arlo camera. But both devices just times out. I could not get either of them to recognize the other.
I tried leaving the battery out for a day or two and try again, but it doesn't work either. The same symptom persisted.
Finally, I decided to turn off the base station, wait two seconds, and turn the base station back on. The Arlo camera was still blinking blue to indicate sync mode. The Arlo base station took a while to boot up. Then all of a sudden, I see the Arlo camera blinking blue quickly (indicating syncing successful). I checked the app again and the camera's there!
I guess it was a base station problem when I assumed it was the camera's problem.
Did your message disappear? Read the Forums FAQ.
Spam Control | * indicates required field
TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.
No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.
Messages, files, and images copyright by respective owners.
66 Users Online
Copyright © 2004 - 2018. All Rights Reserved.