Plumbing Tip: Low Water Pressure at the Faucet
If the water pressure is low at the sink focet, the most likely cause is that dirt deposits are caught in the faucet filter. The faucet filter is installed at the end of the faucet neck. You can easily unscrew it using a vise grip. After unscrewing the end of the faucet, remove the filter and clean it out. From what I seen it's usually these white calcium like deposits that clogs the faucet. After cleaning these dirt out, put the filter back and screw it back in. Your water flow should be back to normal.
Now here is the next question . . . What if you clean it out and the cold water flows great, but the hot water pressure is still low?
Did your message disappear? Read the Forums FAQ.
Spam Control | * indicates required field
TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.
No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.
Messages, files, and images copyright by respective owners.
68 Users Online
Copyright © 2004 - 2018. All Rights Reserved.