Forums: Home: Wayne Dalton

Add Comment | Related Links | TrackBack
Related Content

idrive opens upon close

Have had this IDrive since the house was built( about 9 years) and have recently been having problems with the garage
door not closing. It will come back up as soon as it hits the ground. There is absolutely nothing in the way that would
cause it to not close. Please help! Wayne Dalton is no longer taking customer service or repair calls.

HomeMom
Fri, 03 Aug 2012 01:26:23 +0400

Have you performed the "profile" routine after this problem started occurring? After performing the "profile" routine, does it still fail in the same way?

Chieh Cheng
Fri, 03 Aug 2012 03:04:05 +0400

As Cheng mentioned, re-profiling might be a good idea. I would also operate the door manually to check for proper operation of the door itself.

Alex Fregosi
Tue, 04 Sep 2012 05:15:39 +0400

I ran into the same problem. Ran the profile routine as mentioned on the label that's on my door. it said the unit was supposed to cycle up and down twice and then would be set. Mine went up, then down, but would not go up again. No it won't do anything but beep at me.

Mike
Fri, 14 Dec 2012 00:25:50 +0300

I would start by operating the door manually and checking to see if the door isn't binding and is balanced properly. The door should not "stick" at any point in travel along the tracks and should balance when you open it halfway, meaning that the door should stay in place when you open it halfway. If your door fails the balance test and/or sticks, call a pro so they can fix your door and then try reprogramming the operator. Given that your door is 9 years old, it's probably due for a tune-up/lube. You should also check to make sure the tracks are not binding against the door and that they aren't forcing the door sections tightly against the stop molding.If the door works fine, then I would try reprogramming (or "re profiling" as Wayne Dalton referred to it when they still made these machines) to see if that solves the problem. Hope this helps! If not, then let us know! Best of luck!

Alex F
Sat, 15 Dec 2012 05:57:23 +0300

Add Comment | Related Links | TrackBack
Related Content

Add Comment

Spam Control | * indicates required field

TrackBack

TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.

Send Ping | TrackBack URL | Spam Control

No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.

Messages, files, and images copyright by respective owners.

Copyright © 2004 - 2024. All Rights Reserved.