Forums: Home: Wayne Dalton

Add Comment | Related Links | TrackBack
Related Content

idrive - Programming the External Keyless Entry

Hi all,
bought our house with an i-drive, from foreclosure so there is "nobody" to ask for manuals or questions, etc.
The opener works with the wall mounted control BUT we are unable to program/re-program the exterior keyless entry or the remotes in our cars, which are integrated with the car. There was no remote control to be found with the house.
I've looked all over the internet and on WD website. Seems they don't sell the i-Drive anymore so the "links" only take you back to the homepage for the website. Not helpful.
I've tried the instructions that were taped to the wall, the instructions from our car manuals, the instructions from posts online……… nothing works.
Any ideas?

layla sharief
Tue, 22 May 2012 19:51:56 +0400

Read through the full manual and try again. The full instruction manuals are available in this thread: Wayne-Dalton idrive (Torsion Spring) Garage Door Opener.

Chieh Cheng
Tue, 22 May 2012 20:59:27 +0400

Do you have an idrive for Torsion Spring or for a TorqueMaster?

Jim
Mon, 28 May 2012 21:57:53 +0400

http://www.wayne-dalton.com/assets/Openers/306134-02_5-Butto . . .

Jerry
Mon, 11 Jun 2012 07:34:22 +0400

Add Comment | Related Links | TrackBack
Related Content

Add Comment

Spam Control | * indicates required field

TrackBack

TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.

Send Ping | TrackBack URL | Spam Control

No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.

Messages, files, and images copyright by respective owners.

Copyright © 2004 - 2024. All Rights Reserved.