Add Comment
|
Related Links
|
TrackBack
Bauer 20V Power Tools Battery Interfaceanyone have any luck making an adapter to use bauer batteries on hercules tools? nick Re: the pin labeled TH. I can't verify this at the moment, but I would expect that connects to a thermistor to monitor battery pack temperature. I have an adapter from Amazon to allow me to use a Milwaukee M18 battery in a Bauer tool. My adapter has a 10k ohm resistor from B- (battery negative) to the TH terminal, ans also a 15.0k ohm resistor from B- to the adjacent terminal labeled IO in the image on this page. Tom Bruhns TH is the thermistor pin (thermistor is a diode that changes resistance with temperature) used to sense the battery's temperature, its room temperature resistance is around 10k ohms. Anton
Add Comment
|
Related Links
|
TrackBack
Did your message disappear? Read the Forums FAQ. Add CommentSpam Control | * indicates required field TrackBackTrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites. Send Ping | TrackBack URL | Spam Control No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here. Messages, files, and images copyright by respective owners. |
Articles
|
Wiki
173 Users Online
|
Copyright © 2004 - 2024. All Rights Reserved. |