|
Separating the Engine and Transmission on a Subaru ImprezaI have a 2001 Subaru Impreza 2.5 RS. It's got over 105K miles on it now. So I've been dismantling it to replace the clutch and the flywheel. My friend, Sasha, came by to help me pull the engine and transmission apart. We spent two nights, close to eight hours, tugging, wiggling, chiseling the engine and transmission. They won't budge. We thought maybe we forgot to unbolt something. But everything checked out. We were finally jury-rigging a brake-piston-like device to push through the starter hole, when it occurred to us that the hydraulic clutch cylinder is basically doing the same thing. We remounted the cylinder onto the transmission, got into the driver seat, stepped on the clutch pedal. Voila! The transmission and engine separated like a charm. The clutch petal went all the way to the floor and wouldn't pop back until we manually pull it. The next time you have a hard time pulling your engine and transmission apart, you might try this trick. But be careful, since the clutch system is probably under spring tension. Chieh Cheng
Did your message disappear? Read the Forums FAQ. Add Comment
TrackBackTrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.
No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here. Messages, files, and images copyright by respective owners. |
Articles
|
Wiki
210 Users Online
Get Our
|
|
Copyright © 2004 - 2024. All Rights Reserved. |
|
Related Links
|
TrackBack
