Add Comment
|
Related Links
|
TrackBack
Seagate 5 GB ST1 Drive in PCMCIAI took the Seagate 5GB ST1 Microdrive out of a Rio Carbon and inserted it into the PCMCIA slot on my Windows XP notebook, but the drive does not show up in "My Computer". So I looked at the Device Manager and it shows the "PCMCIA IDE/ATAPI Controller" driver, but no driver for the disk drive itself. Is there a way I can get the drive to show up? Attached Image: Chieh Cheng Chieh, it would not show up as a drive in the explorer right out of Carbon. The reason is, Carbon does not format the drive with FAT. Instead it emulates a portion of disk as a FAT partition. More specifically, the location of partition tabe and FAT tables on a drive pulled fresh out of working Carbon is not the standard one. However, you can format the drive in Windows and then on it will show up as a drive. You cannot use this Windows formatted drive in a Carbon! digicool Thanks for the tip on how Rio Carbon deals with the partitions. So how do you format a drive in Windows if it doesn't show up? Chieh Cheng Computer Management is the tool. Right click my computer icon and select Manage. Inside the tool, choose Disk management. You will see a 4900 odd MB drive showing up (beware, it will take more time than usual to show the drives because it will try hard to understand the Seagate drive's format which is non-standard). Right click that drive and select format! digicool Thanks, I will give that a try in a few days. I tried to log on to Riovolution to continue our discussion, but got a message: This site is defaced!!! Did Riovolution get hacked? Chieh Cheng Some information about the drive being locked now: Re: Seagate ST1 Format Chieh Cheng My MP3 Memory is Seagate ST-1 5GB!! RamDisk Which MP3? Chieh Cheng I have confirmation that the embedded Seagate 5 GB ST1 will not how up in Disk Management. Please see the "My Adventure with the Seagate 5 GB ST1 Drive (FW: 3.08)" TrackBack below. Chieh Cheng i just extracted a Seagate 5GB ST1 Drive from my Olympus m-robe 100...i feel like a little kid but i don't know what to do next... the mp3 was showing a message: Total error, service needed 04.. and the guys at the service line told me that service costs 98 euros.. almost the price i bought that 3-4 years ago.. when i connect it to windows.. it sees it.. but cannot read it, and i cannot format it... i see that you use it in IDE mode, but how do you connect this little cable line to the ide cable? is there any adapter for that? George L. See the "My Adventure with the Seagate 5 GB ST1 Drive (FW: 3.08)" TrackBack link below. That should answer all your questions. If not, please ask. Good luck. Chieh Cheng
Add Comment
|
Related Links
|
TrackBack
Did your message disappear? Read the Forums FAQ. TrackBackTrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites. Send Ping | TrackBack URL | Spam Control Title: Rio Carbon Internals Title: My Adventure with the Seagate 5 GB ST1 Drive (FW: 3.08) Add CommentSpam Control | * indicates required field Messages, files, and images copyright by respective owners. |
Articles
|
Wiki
174 Users Online
|
Copyright © 2004 - 2024. All Rights Reserved. |